Our Wrought Iron Fence is the easiest fence on the market to install. Easier than chain link, easier than wood and much easier than aluminum fence. It can be broken down into 5 easy steps.
- Stake a string line for each run of fence you want to put up and have them cross in the corners. The string line gives you a guide when setting your posts so your fence is straight.
- Dig holes and set your posts in concrete with 8’ (96”) in-between them. Your post hole depth will be the length of your post minus your fence height. Check step 4 to make sure you allow the proper distance between your gate posts.
- After your posts have dried; you can go back and hang your fence sections. Just slide the bracket over the end of each horizontal rail and use the included screws to attach it to the post. If security is your concern you can weld the sections to the posts as well.
- Hang your gates. Make sure you allow the proper hinge and latch allowances between your gate posts. You can do this by laying the gate and posts on ground along with the hardware and measuring the distance needed.
- Step back and admire your work and the cost savings! Now snap some photos and send them to us. We always like to see the great job our customers do installing their own fence!